News

In the CCTV industry, you can use RG59 cable, RCA Plug and Play cable, and CAT5 cable. These are the three types of CCTV cable. The CCTV cable systems come with a number of tools and components. Consequently, it is crucial to understand the basics like what a CCTV is and why choosing the right cable is important.

M Sensor Connector Performance


1.Withstand voltage: Withstand voltage is the critical voltage that can withstand higher than the rated voltage without causing breakdown within a specified time between the insulated parts of the contact pair or between the insulated parts and the ground. It is mainly affected by the contact and spacing, creepage distance and geometry, insulator material, ambient temperature and humidity, and atmospheric pressure.


2.Flammability: Any connector cannot be insulated from the current during operation, which will create a fire hazard. Therefore, the connector is required not only to prevent fire, but also to self-extinguish in a short time when it catches fire. When choosing, pay attention to choosing electrical connectors with flame-retardant and self-extinguishing insulating materials


MOCO is a professional connector sales platform with 12 years of experience in the industry. It mainly sells RF coaxial connectors, push-pull connectors, military aviation connectors, etc. Our products are widely used in military aerospace, commercial aviation, industrial applications, medical and other fields.


If you have any questions, please feel free to contact us.

M sensor connector parameters

1.Mechanical parameters: The contact pressure in the connector is an important indicator that directly affects the size of the contact resistance and the amount of contact pair wear. For circular pinhole contacts, a standard pin with a specified weight is usually used to verify the contact's ability to bear weight. Usually, the diameter of the standard pin is the lower limit of the contact diameter -5 μm. The total separation force is generally twice the sum of the single-leg separation forces.


2.Environmental parameters o: Environmental parameters mainly include ambient temperature, humidity, temperature change, atmospheric pressure, corrosive environment, etc. The use environment of the quick connector during storage and transportation has a great influence on its performance, so the corresponding connector must be selected according to the actual environmental conditions.


MOCO is a professional connector sales platform with 12 years of experience in the industry. It mainly sells RF coaxial connectors, push-pull connectors, military aviation connectors, etc. Our products are widely used in military aerospace, commercial aviation, industrial applications, medical and other fields.


If you have any questions, please feel free to contact us.

M12 connectorsare circular connectors with a 12mm locking thread for sensors, actuators, fieldbus and industrial Ethernet, primarily used in factory automation applications. They are typically IP65, IP68 and IP69K rated and are ideal for washdown and corrosive environments.

Discover the world of industrial connectors with MOCO Connectors. From different types of contacts to their applications, we have you covered for all your connectivity needs.

As the world of technology continues to evolve, so does our need for efficient and reliable connectors. One such device is the BNC adapter, which has become a staple in many industries. But are BNC adapters lossy? We’ll take a deep dive into the world of BNC adapters, the potential for signal loss, and what users can do to minimize this issue.Are BNC Adapters Lossy? Factors That ContributeSignal Loss in Coaxial ConnectorsThe short answer to the question, “Are BNC Adapters Lossy?” is, yes*. However, it’s important to understand that signal loss is inherent to any connector type, not just BNC adapters. This loss is called insertion loss, and refers to the reduction in signal strength when the connector is inserted into a transmission line.Insertion loss can be caused by a variety of factors, such as impedance mismatch, connector quality, and cable type. While BNC adapters are known for their reliable performance, it’s important to remember that they are not immune to these issues.Impedance MismatchAn impedance mismatch occurs when the impedance of a BNC adapter does not match the impedance of the connected device or cable. This mismatch causes reflections, which in turn cause signal loss and attenuation. To minimize this problem, it’s critical to select BNC adapters with the proper impedance rating (usually 50 or 75 ohms) to match the devices in your system.Connector QualityThe quality of the BNC adapter can also contribute to signal loss. Quality connectors typically have quality materials and construction, resulting in better performance and lower insertion loss. In contrast, cheaper alternatives may use lower-quality materials, resulting in higher signal loss and potential connection issues. As with any component, you get what you pay for - investing in high-quality BNC adapters is a smart choice for optimal signal transmission.Tips for Minimizing Signal Loss in BNC AdaptersProper InstallationImproperly installed BNC adapters can exacerbate signal loss. Make sure the connectors are properly aligned and securely fastened. When connected, listen for the satisfying "click" that indicates a secure connection. Also, avoid over-tightening the adapter, as this can damage the connector and negatively affect performance.Cable Quality and LengthThe quality and length of the cable used with the BNC adapter can also affect signal loss. High-quality shielded cables with low attenuation are ideal for minimizing signal loss. Also, keep cable lengths as short as possible to reduce the potential for signal degradation.Regular Inspection and MaintenanceRegularly inspect your BNC adapters and cables for signs of wear. Damaged or corroded connectors can cause signal loss and should be replaced promptly. By keeping your equipment in good condition, you can minimize signal loss and ensure reliable performance.Summary: BNC Adapters and Signal LossWhile BNC adapters a...

BNC Adapters: What Are They?


Brief Overview
BNC adapters, also known as Bayonet Neill-Concelman adapters, are a type of coaxial connector used primarily for radio frequency (RF) and video signal transmission. For decades, they have been a mainstay in various industries such as communications, networking, and broadcasting. Known for their fast and secure connections, BNC adapters are often found in equipment such as oscilloscopes, video monitors, and CCTV systems.


The Mechanics Behind BNC Adapters


BNC adapters consist of a male and female component, each with a bayonet-style locking mechanism for a secure connection. The male component has a center pin, while the female component has a socket. When connected, the shielded design of the adapter helps reduce electromagnetic interference (EMI), ensuring reliable signal transmission.

Contact us now, best wishes!

From complex electronic systems to simple household connections, cable assemblies play a crucial role in transmitting electricity. Learn more about the importance of cable assemblies and how they work on Moco Connectors.

In the fast-paced world of photography and videography, your camera cable connector can make or break your shooting experience. A carefully chosen connector guarantees clear video signal transmission, so you capture every scene flawlessly. 


Whether you're a professional videographer handling high-resolution footage or an avid hobbyist perfecting your craft, reliable connectors ensure seamless performance and minimize frustrating signal loss or interference. Robust, dependable connections are essential for both professional and consumer-grade cameras, providing a stable link that maintains the quality and integrity of your work. 


Choosing the right camera cable connector is vital to avoid interruptions and capture perfect moments with confidence.

BNC connectors are commonly used in a wide range of applications, from telecommunications to audio and video equipment. However, when it comes to outdoor or wet environments, standard BNC connectors may not provide adequate protection from moisture. That's where waterproof BNC connectors come in - connectors specifically designed to protect your connections from water damage. In this article, we'll take a closer look at waterproof BNC connectors, how they work, and why they're important.What are waterproof BNC connectors?Waterproof BNC connectors are connectors that are specifically designed to protect your connections from moisture. They are often used in outdoor or marine environments where exposure to rain, splashes, or other forms of moisture is a concern. These connectors are designed with a sealed or gasketed interface that prevents water from entering the connection, ensuring your signal remains strong and reliable even in wet conditions.How do waterproof BNC connectors work?Waterproof BNC connectors work by creating a tight seal between the connector and the cable, preventing moisture from entering the connection. They typically use a thread-locking mechanism to ensure a secure fit, and may also have specialized coatings or finishes that provide additional moisture protection.One common type of waterproof BNC connector is a compression connector. Compression connectors use a compression tool to create a tight seal between the connector and the cable, providing a secure and reliable moisture-proof connection. Another type of waterproof BNC connector is a crimp connector, which uses a crimping tool to create a tight seal between the connector and the cable.Why are waterproof BNC connectors important?Waterproof BNC connectors are important for a number of reasons. First, they help ensure that your connections remain reliable and secure even in wet or humid conditions. Moisture can cause corrosion and damage to connections, which can lead to signal loss or even equipment failure. By using waterproof BNC connectors, you can help prevent these problems and keep your equipment running smoothly.Waterproof BNC connectors are also important for safety reasons. In certain applications, such as marine or outdoor environments, moisture can pose a significant safety risk. By using waterproof connectors, you can help prevent short circuits or other hazards that could injure people or damage equipment.Tips for Selecting and Using Waterproof BNC ConnectorsIf you are considering using waterproof BNC connectors, keep the following in mind. First, it is important to select a connector designed for your application. There are many different types of waterproof connectors to choose from, each with its own unique features and specifications. Be sure to select a connector that is compatible with your equipment and meets the requirements of your specific applica...

Connectors are an essential part of any electrical or electronic system and are used to establish a secure and reliable connection between two or more devices. There are various types of connectors available in the market and understanding their features and functions is essential to choosing the right connector for your application.TNC and BNC connectors are two such connectors commonly used in electronic systems. While they may look similar at first glance, there are significant differences between the two. In this article, we will discuss these differences and help you decide which connector is best for your needs.TNC Connector OverviewTNC connector, short for Threaded Neill-Concelman connector, is a type of radio frequency connector commonly used in wireless communications and other high-frequency applications. It was developed as an improvement over the earlier BNC connector to provide a more secure and reliable connection.TNC connectors have a threaded connection mechanism that ensures a secure connection that is not easily disconnected. It also has a characteristic impedance of 50 ohms, making it ideal for use in high-frequency applications. TNC connectors are available in both male and female versions, with the male connector having a threaded outer conductor and the female connector having a threaded inner conductor.BNC Connector OverviewThe BNC connector, short for Bayonet Neill-Concelman connector, is another RF connector commonly used in electronic systems. It was developed in the 1940s and is still widely used today, especially in video and audio applications.The BNC connector has a bayonet coupling mechanism that allows for quick and easy connection and disconnection. It also has a characteristic impedance of 50 ohms, making it ideal for high-frequency applications. BNC connectors are available in male and female versions, with the male connector having a pin center conductor and the female connector having a socket center conductor.Difference between TNC and BNC connectorsWhile both TNC and BNC connectors are designed for high-frequency applications and have a characteristic impedance of 50 ohms, there are some differences between the two.Coupling MechanismThe most notable difference between TNC and BNC connectors is their coupling mechanism. TNC connectors have a threaded coupling mechanism that provides a more secure and reliable connection. On the other hand, BNC connectors have a bayonet coupling mechanism that allows for quick and easy connection and disconnection.Frequency RangeAnother difference between TNC and BNC connectors is their frequency range. While both connectors have a characteristic impedance of 50 ohms, TNC connectors are designed for higher frequency applications than BNC connectors. TNC connectors can typically handle frequencies up to 11 GHz, while BNC connectors are limited to frequencies up to 4 GHz.SizeTN...

Waterproof BNC connectors are ideal for applications where exposure to water is a concern.  These applications include:


Surveillance systems: CCTV cameras installed outdoors or in harsh environments require waterproof connectors to ensure the signal is not interrupted by water or other liquids.
Aviation: BNC connectors are widely used in avionics applications where exposure to moisture is an issue.  Waterproof BNC connectors are essential in these applications to ensure equipment continues to operate even in wet conditions.
Telecommunications: BNC connectors are used in telecommunications applications to transmit video signals over long distances.  Waterproof BNC connectors are essential in these applications to ensure the signal is not interrupted by contact with water or other liquids.

Best wishes, contact us immediately!