What Is NDT & How Do Our Products Application In NDT Equipment?

Nondestructive testing (NDT) is any of a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms nondestructive examination (NDE), nondestructive inspection (NDI), and nondestructive evaluation (NDE) are also commonly used to describe this technology.Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. The six most frequently used NDT methods are eddy-current, magnetic-particle, liquid penetrant, radiographic, ultrasonic, and visual testing. NDT is commonly used in forensic engineering, mechanical engineering, petroleum engineering, electrical engineering, civil engineering, systems engineering, aeronautical engineering, medicine, and art. Innovations in the field of nondestructive testing have had a profound impact on medical imaging, including on echocardiography, medical ultrasonography, and digital radiography.

Non Destructive Testing (NDT/ NDT testing) Techniques or Methodologies allow the investigator to carry out examinations without invading the integrity of the engineering specimen under observation while providing an elaborate view of the surface and structural discontinuities and obstructions. The personnel carrying out these methodologies require specialized NDT Training as they involve handling delicate equipment and subjective interpretation of the NDT inspection/NDT testing results.

NDT methods rely upon use of electromagnetic radiation, sound and other signal conversions to examine a wide variety of articles (metallic and non-metallic, food-product, artifacts and antiquities, infrastructure) for integrity, composition, or condition with no alteration of the article undergoing examination. Visual inspection (VT), the most commonly applied NDT method, is quite often enhanced by the use of magnification, borescopes, cameras, or other optical arrangements for direct or remote viewing. The internal structure of a sample can be examined for a volumetric inspection with penetrating radiation (RT), such as X-rays, neutrons or gamma radiation. Sound waves are utilized in the case of ultrasonic testing (UT), another volumetric NDT method – the mechanical signal (sound) being reflected by conditions in the test article and evaluated for amplitude and distance from the search unit (transducer). Another commonly used NDT method used on ferrous materials involves the application of fine iron particles (either suspended in liquid or dry powder – fluorescent or colored) that are applied to a part while it is magnetized, either continually or residually. The particles will be attracted to leakage fields of magnetism on or in the test object, and form indications (particle collection) on the object's surface, which are evaluated visually. Contrast and probability of detection for a visual examination by the unaided eye is often enhanced by using liquids to penetrate the test article surface, allowing for visualization of flaws or other surface conditions. This method (liquid penetrant testing) (PT) involves using dyes, fluorescent or colored (typically red), suspended in fluids and is used for non-magnetic materials, usually metals.

Analyzing and documenting a nondestructive failure mode can also be accomplished using a high-speed camera recording continuously (movie-loop) until the failure is detected. Detecting the failure can be accomplished using a sound detector or stress gauge which produces a signal to trigger the high-speed camera. These high-speed cameras have advanced recording modes to capture some non-destructive failures.[4] After the failure the high-speed camera will stop recording. The captured images can be played back in slow motion showing precisely what happened before, during and after the nondestructive event, image by image.

As a high level NDT company, I believe the high important things are provide the Accuracy of testing data,Quick testing results & professional NDT equipment.

So,What will be requirement to get those 3 points?

1-professional NDT equipment:

   We believe you had brought the most high technology equipment from the most famous brand over the world,that's no doubt about it.

2-Accuracy of testing data:

   What will the accuracy of testing data?

   high speed and low loss signal transmission---it need high quality connectors for ndt equipment ,cables and Reasonable combination between connectors & Cables.

3-Quick testing results:

   I believe in your fact working you had faced those problem:

   Cable broken,ndt Connector broken or other reason lead to the testing data cannot transfer to the NDT equipment.

   Also we know the cable,connectors also the parts of cable harness are quick-wear part and consumables.

   When you face those problem,you will ask for the replacement parts from your equipment supplier first time.

   But normally you cannot solve those problem from your equipment supplier soon, even they will bring you more perplex,cause your supplier also need purchase new ndt cable harness or connectors from their supplier.

   And even if they have replacement repertory parts,the price will be very higher.

   Delivery,no doubt the delivery will be long.

   And above those questions I believe you faced before.

   OK,right now our professional working can solved your misgivings.

   Price:we can provide you reasonable price for the cable and connectors.

   Delivery:we can provide you very fast delivery from development to finished cable harness (or connectors).

   Solution:we can provide you very professional suggestion on ndt cables and connectors

Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers

Send your inquiry

Choose a different language
Current language:English